 |
| R&TTE
compliance information |
Circuit Design's standard RF modules
have been assessed for conformity with the essential requirements of
the R&TTE directive. The table below lists the models complying with
the relevant European standards. European standards are available on
the
ETSI website
|
CE marked products
 |
| Click the model name to see the
Declaration of Conformity and the detailed regulatory compliance
information of each model. |
|
|
| |
| Conformity
assessment of the final product* |
(*Circuit design’s RF modules are
designed for embedding in other equipment. Products incorporating RF
modules and modems are hereinafter referred to as final products)
The manufacturer of the final product is responsible for the
conformity assessment procedures of the final product in accordance
with the R&TTE Directive.
As to the conformity assessment of the R&TTE Directive Article 3.2
(Efficient use of the radio spectrum), the manufacturer of the final
product incorporating an R&TTE assessed radio module will be
exempted from its conformity assessment procedures. For details of
how to use the conformity assessment of the RF module, please
consult the relevant authorities or accredited certification bodies.
|
| Notification of the
final product |
The notification required by R&TTE
Directive Article 6 (4) is not necessary if the final product is
used in the harmonized frequency band and is classified as Class-1
equipment. If the final product is not used in the harmonized
frequency band and is classified as Class-2 equipment, the
manufacturer of the final product has a duty to notify the relevant
radio regulatory authorities in the countries where the final
product is sold. A list of Class-1 equipment is available on the web
site of ERO.
|
| Exemption clause |
Circuit Design, Inc. does not guarantee
the accuracy of the above mentioned information about the conformity
assessment and notification of the final product. Directives,
technical standards, principles of operation and the like may be
interpreted differently by the authorities in each country. Also the
national laws and restrictions vary with the country. In case of
doubt or uncertainty, we recommend that you check with the
authorities or official certification organizations of the relevant
countries.
|
| Related information |
 |
CEPT ERC/REC
70-03 |
|
434 MHz band plan (ERC/REC
70-03 ANNEX1) |
|
869 MHz band
plan (ERC/REC 70-03 ANNEX1 & ANNEX7) |
|
Requirements for a final product that
integrates an R&TTE assessed radio module |
RoHS compliance information |
