CIRCUIT DESIGN, INC.Compétence dansles solutions par radio

SEARCH

HOMEProduitsmoyensCommander

  TX/RX  |  Transceiver  |  Audio  |  Modem  |  Accessoires  |  Sélection  |  Conformité  |  Applications
 
basic connection

There is an LED terminal to indicate that the signal is being received.


WA-TX-03 connection example

* A 4.2 V power supply is used for the electret condenser microphone. The recommended value for R1 is 2 kohm with a 4.2 V supply. 
* If the input level is too high, insert a VR or simply insert a resistor at Mic.IN terminal in serial. (The level is lowered by -6 dB with 5 kohm, and by -10 dB with 10 kohm ignoring impedance of the microphone.) 
* If the level is insufficient, a microphone amplifier is required between the microphone and the WA-TX-03-R.


WA-RX-03 connection example

CIRCUIT DESIGN, INC.
Phone:++81-263-82-1024  FAX:++81-263-82-1016  E-mail:contact

ALL Right Reserved,Copyright © 2005 Circuit Design,Inc.