Basic connection
* 128 channel selectable by 7 bit DIP SW
* 128 channel selectable by 14 pins (7 signal pins and 7 ground pins) and 1
solder jumper
* Input signal should be 300 to 4800 bps with 20 ms maximum pulse width
* The CDP-02F-R / FP-R does not have a specific data protocol
* It takes approx. 50 ms (434 MHz) to stabilize the transmission frequency.
A preamble period is required to avoid corrupted data transmission.
* The receiver is not equipped with a mute circuit.
CIRCUIT DESIGN, INC.
Phone:++81-263-82-1024 FAX:++81-263-82-1016 E-mail:
